-By Eric Fortune
"Hello Eric, how are you? I'm trying to make more traditional stuff, but i must confess i'm having a hard time! Thats why I want to ask you a quick simple question: Which paper are you using to make water basis painting? Is it hot pressed? your paintings are soo smooth i hope you mind mind sharing this info, but if you do, i totally understand, no hard feelings :) Thanks in advance and keep it up the awesome stuff!"
I think one must spend a lot of time becoming very familiar with any medium they are working with as well as the surfaces that they are working on. The quality of materials an artist uses can make a difference. However, I personally don't think that if you get the best paper and best paint with the best brushes the quality of work will just appear if the hours and hours of practice aren't there to back it up.
As for my own paintings, I get smooth transitions by using various methods ie wet on wet application, scumbling, dry brush etc. You can see some of my videos on youtube for tutorials. The thing that really connects all of these techniques is the time it takes to achieve the look I want. It doesn't happen on the third pass or even the seventh. It often takes long hours and multiple, multiple layers of paint to get a look I want. And after so many years of doing this I feel fairly competent that I could do it on just about any watercolor paper surface.
That being said let's get into the materials I actually use.
Watercolor Paper: I mostly use Arches 300lb Hot press. I like the heavy weight and the surface though smooth isn't too smooth. I find 300lb Cold press to have way too much texture for my liking. I feel it disrupts my imagery too much by casting deep shadows on the surface. When working on lighter paper like 140lb I think cold press is quite nice. The texture is much more subtle compared to cold press at 300lb. 140lb hot press is nice as well but almost too smooth for my taste. I've tried Fabriano brand paper previously and it was fine. There were often scratch marks that I wouldn't notice til I put down my first wash. This sucked because by then I've already spent the time transferring and finalizing the drawing. It may have been the store's fault. Not quite sure. So now I hold each piece of paper I buy up to the light and check for faint scratches before purchasing. If there's a scratch and you're cool with it you could probably ask for a discount:)
Brushes: I buy Utrecht brand brushes mostly. They are affordable and fairly good brushes. I inspect each brush I buy to make sure it's in good condition. Every now and then I get home and the brush is a little off. I use scissors or a fresh x-acto blade to make necessary adjustments if possible. Because the brushes are fairly inexpensive I don't feel too bad when they eventually get ruined by the accumulation of acrylic residue. I am however, very good about rinsing my brushes periodically during my painting session and then cleaning them with warm water and soap when done for the night. Don't forget the right brush for the right job. I used to paint with only a tiny round brush because that's what I was comfortable with. I ended up wasting a lot of time. Experiment with different brushes and different sizes.
Paint: I have mostly Liquitex paint. I heard Palencar uses Liquitex so I tried them and liked them. I've also tried Golden, and Utrecht brands and even had to use some student grade acrylic in a pinch. I have to admit they all seem to work just fine to me. It may have to do with the fact that I water them down so much.
Set Up: As you can see I have a small tupperware container that I use to keep my paints in. I put a paper towel at the bottom and spritz it with water every not and then to keep them wet. This helps the paints to last longer so they don't go to waste. I have a scrap piece of water color paper near by to test my mixed colors on to make sure it's right before applying it to the actual painting.
I hope this helps.
Eric
P.S. Donato is awesome. He always welcomes other artists to stop by and chat or look at some art work. On a trip to NY a few years back I contacted him and did just that. It made my day! Most of the artist I know are super nice and if they aren't too busy will answer questions and such. If you live in or around Columbus and would like to visit the studio for any questions or feedback etc. feel free to contact me.
"Hello Eric, how are you? I'm trying to make more traditional stuff, but i must confess i'm having a hard time! Thats why I want to ask you a quick simple question: Which paper are you using to make water basis painting? Is it hot pressed? your paintings are soo smooth i hope you mind mind sharing this info, but if you do, i totally understand, no hard feelings :) Thanks in advance and keep it up the awesome stuff!"
I think one must spend a lot of time becoming very familiar with any medium they are working with as well as the surfaces that they are working on. The quality of materials an artist uses can make a difference. However, I personally don't think that if you get the best paper and best paint with the best brushes the quality of work will just appear if the hours and hours of practice aren't there to back it up.
As for my own paintings, I get smooth transitions by using various methods ie wet on wet application, scumbling, dry brush etc. You can see some of my videos on youtube for tutorials. The thing that really connects all of these techniques is the time it takes to achieve the look I want. It doesn't happen on the third pass or even the seventh. It often takes long hours and multiple, multiple layers of paint to get a look I want. And after so many years of doing this I feel fairly competent that I could do it on just about any watercolor paper surface.
That being said let's get into the materials I actually use.
Watercolor Paper: I mostly use Arches 300lb Hot press. I like the heavy weight and the surface though smooth isn't too smooth. I find 300lb Cold press to have way too much texture for my liking. I feel it disrupts my imagery too much by casting deep shadows on the surface. When working on lighter paper like 140lb I think cold press is quite nice. The texture is much more subtle compared to cold press at 300lb. 140lb hot press is nice as well but almost too smooth for my taste. I've tried Fabriano brand paper previously and it was fine. There were often scratch marks that I wouldn't notice til I put down my first wash. This sucked because by then I've already spent the time transferring and finalizing the drawing. It may have been the store's fault. Not quite sure. So now I hold each piece of paper I buy up to the light and check for faint scratches before purchasing. If there's a scratch and you're cool with it you could probably ask for a discount:)
Brushes: I buy Utrecht brand brushes mostly. They are affordable and fairly good brushes. I inspect each brush I buy to make sure it's in good condition. Every now and then I get home and the brush is a little off. I use scissors or a fresh x-acto blade to make necessary adjustments if possible. Because the brushes are fairly inexpensive I don't feel too bad when they eventually get ruined by the accumulation of acrylic residue. I am however, very good about rinsing my brushes periodically during my painting session and then cleaning them with warm water and soap when done for the night. Don't forget the right brush for the right job. I used to paint with only a tiny round brush because that's what I was comfortable with. I ended up wasting a lot of time. Experiment with different brushes and different sizes.Paint: I have mostly Liquitex paint. I heard Palencar uses Liquitex so I tried them and liked them. I've also tried Golden, and Utrecht brands and even had to use some student grade acrylic in a pinch. I have to admit they all seem to work just fine to me. It may have to do with the fact that I water them down so much.
Set Up: As you can see I have a small tupperware container that I use to keep my paints in. I put a paper towel at the bottom and spritz it with water every not and then to keep them wet. This helps the paints to last longer so they don't go to waste. I have a scrap piece of water color paper near by to test my mixed colors on to make sure it's right before applying it to the actual painting.
I hope this helps.
Eric
P.S. Donato is awesome. He always welcomes other artists to stop by and chat or look at some art work. On a trip to NY a few years back I contacted him and did just that. It made my day! Most of the artist I know are super nice and if they aren't too busy will answer questions and such. If you live in or around Columbus and would like to visit the studio for any questions or feedback etc. feel free to contact me.
You have read this article with the title A Question of Paper. You can bookmark this page URL http://teamcolors.blogspot.com/2011/05/question-of-paper.html. Thanks!
Write by:
RC - Friday, May 13, 2011
Comments "A Question of Paper"
Post a Comment